Data analysis of ship ventilation ducts based on CATIA V6

Yongjin LU; Bo WU; Taotao LI

doi:10.3969/j.issn.1673-3185.2017.02.007

Volume 12 Issue 2

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Ship Research > 2017 > 12(2): 57-62

Yongjin LU, Bo WU, Taotao LI. Data analysis of ship ventilation ducts based on CATIA V6[J]. Chinese Journal of Ship Research, 2017, 12(2): 57-62. doi: 10.3969/j.issn.1673-3185.2017.02.007

Citation:

Yongjin LU, Bo WU, Taotao LI. Data analysis of ship ventilation ducts based on CATIA V6[J]. Chinese Journal of Ship Research, 2017, 12(2): 57-62. doi: 10.3969/j.issn.1673-3185.2017.02.007

Citation:

Yongjin LU, Bo WU, Taotao LI. Data analysis of ship ventilation ducts based on CATIA V6[J]. Chinese Journal of Ship Research, 2017, 12(2): 57-62. doi: 10.3969/j.issn.1673-3185.2017.02.007

PDF( 1351 KB)

Data analysis of ship ventilation ducts based on CATIA V6

doi: 10.3969/j.issn.1673-3185.2017.02.007

China Ship Development and Design Center, Wuhan 430064, China

Received Date: 2016-06-29
Available Online: 2017-03-13
Publish Date: 2017-04-01

Abstract

Abstract

In order to research on CATIA V6 ship duct design and related data, combined with a practical engineering background, a three-dimensional design method for the CATIA V6 ventilation system is exhibited, and the catalog composition of duct fittings and duct lofting process are presented. Meanwhile, revolving around the system design modules, the module processing objects and data storage location are analyzed in order to determine the object of study. And on this basis, the definition and specific content of the engineering technological tables are illustrated in detail; specifically, the contents are extended. Moreover, in light of the three-dimensional model, further research into the underlying data structure of ventilation ducts is implemented. The relationships between the major technological tables are shown. The results of the study are not only beneficial for designers to grasp design technology, but also essential for software developers to secure theoretical guidance and technical support.
- ventilation duct,
- three-dimensional design,
- CATIA V6,
- technological table,
- data analysis

FullText(HTML)

References(10)

References

[1]	邵开文, 马运义.舰船技术与设计概论[M].北京:国防工业出版社, 2005.
[2]	陈宁, 张栋.船舶机舱机械通风的计算与气流组织分析[J].舰船科学技术, 2009, 31(3):73-76, 84. http://www.cnki.com.cn/Article/CJFDTOTAL-JCKX201208011.htm CHEN N, ZHANG D. Calculation of artificial ventilation and anlysis of airflow in ship engine room[J]. Ship Science and Technology, 2009, 31(3):73-76, 84(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-JCKX201208011.htm
[3]	江宇, 宋福元, 李彦军, 等.船舶机舱通风数值模拟分析[J].舰船科学技术, 2012, 34(8):52-55, 59. http://www.cnki.com.cn/Article/CJFDTOTAL-JCKX201208011.htm JIANG Y, SONG F Y, LI Y J, et al. Numerical simulation of ventilation and analysis in ship engine room[J]. Ship Science and Technology, 2012, 34(8):52-55, 59(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-JCKX201208011.htm
[4]	陈捷捷, 李炎, 吴波.基于CADDS5和VB的三维船体结构重量重心及材料统计计算系统[J].中国舰船研究, 2007, 2(4):51-55. http://www.ship-research.com/EN/abstract/abstract250.shtml CHEN J J, LI Y, WU B. Statistics computing system for structural gravity center and material of three-dimensional hull based on CADDS5 and VB[J]. Chinese Journal of Ship Research, 2007, 2(4):51-55(in Chinese). http://www.ship-research.com/EN/abstract/abstract250.shtml
[5]	卢永进, 华志刚.基于FORAN的船舶管路三维设计研究[J].船海工程, 2012, 41(5):77-80. http://www.cnki.com.cn/Article/CJFDTOTAL-WHZC201205020.htm LU Y J, HUA Z G. Study on the 3D ship piping design based on FORAN[J]. Ship & Ocean Engineering, 2012, 41(5):77-80(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-WHZC201205020.htm
[6]	姚竞争. TRIBON模型的数据抽取及二次开发[D]. 哈尔滨: 哈尔滨工程大学, 2006. YAO J Z. Data extraction from the tribon product model and the TRIBON development[D]. Harbin:Harbin Engineering University, 2006(in Chinese).
[7]	武振锋, 陈周锋.基于CATIA的CRH380AL动车组头车三维曲面设计[J].武汉大学学报 (工学版), 2013, 46(5):635-639. http://www.cnki.com.cn/Article/CJFDTOTAL-WSDD201305017.htm WU Z F, CHEN Z F. 3D surface design of CRH380AL EMU first carriage based on CATIA[J]. Engineering Journal of Wuhan University, 2013, 46(5):635-639(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-WSDD201305017.htm
[8]	陈奎英, 张冬梅, 吴瑞曦. CATIA软件在船舶设计中的应用[J].青岛远洋船员学院学报, 2008, 29(4):55-59. http://www.cnki.com.cn/Article/CJFDTOTAL-QDYY200804019.htm CHEN K Y, ZHANG D M, WU R X. Elementary introduction of CATIA software's application on shipbuilding[J]. Journal of Qingdao Ocean Shipping Mariners College, 2008, 29(4):55-59(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-QDYY200804019.htm
[9]	曾鲁山, 曾凡明, 刘金林.基于CATIA和VIRTOOLS技术的虚拟机舱漫游研究[J].中国舰船研究, 2008, 3(5):62-64, 80. http://www.ship-research.com/CN/Y2008/V3/I05/62 ZENG L S, ZENG F M, LIU J L. Development of virtual engine cabin using CATIA and VIRTOOLS[J]. Chinese Journal of Ship Research, 2008, 3(5):62-64, 80(in Chinese). http://www.ship-research.com/CN/Y2008/V3/I05/62
[10]	Dassault Systèms. CATIA documentation[EB/OL]. (2008)[2010-09-01]. http://www.maruf.ca/files/catiahelp/CATIA_P3_default.htm.